 
FSG-1
FSG-2
FSG-3
FSG-3A
SRG-SRGS
SRG-FBSR
SRG-WST260
HST-125H
HST-125HCB
HST-125G
HST-125GCB
HST-105
HST-135G(2X,3X)
HST-PE
HST-YG(2X,3X)
DHST-(2X)G
DHST-(3X)GLW
DHST-(3X.4X)G
PT-WF
PT-RSTFE
   |
 Fiberglass
Braided Silicone Rubber Sleeving (SRG-FBSR) produced with
the process of thermal and vulcan-ization is the non-alkali
fiberglass braided
silicone
rubber tubing. This tubing possesses good qualities of
dielectric high wiring insulator for grade electrical
machinery, special bulbs, electrical rich cookers as well as
other household appliance and their protection device
Color scheme: The standard color is white. (red, yellow,
blue, and black are available by special order.)
Packing: The general length is 100M/RL. (the length can be
negotiated)
|
Property Requirements |
|
Property |
Test results
|
|
Bending after
being heated |
No cracking or detach ment of coating shall be
visible. And the original color shall be clearly
recognizable after 48hr±1hr at 260℃±5℃
|
|
Bending at low
temperature |
No cracking or detachment of coating shall be
visible after 60min±10min at -70℃±5℃
|
|
Hydrolysis of
coating |
No running of the
coating, adherence between tubing and paper, between
pieces of tubing nor any sign discoloration of paper
|
|
Flame propagation |
In addition 60sec
(max) the indicator flag on any one of therr test
specimens shall not be burned nor shall flaming or
glowingparticles or flaming drops ignite the cotton.
self-extinguish,UL VW-1&CSA HFS test |
|
Thermal
endurance, Temperature at 2000hr |
200 ℃.以上 |
|
Heat resistance
|
OK |
|
Normal condition
Minmum Value |
7.0 Kv / mim |
|
Normal condition
Average Value |
8.0 KV / mim |
|
Min Thickness |
0.40mm |
|
Measurement Standards |
|
Inside diameter (
mm ) |
Wall Thickness (
mm ) |
|
Normal |
Tolerance |
Minimum |
Maximum |
|
1.0 - 3.0 |
+ 0.20 , - 0.10 |
0.40 |
0.65 |
|
3.5 - 8.0 |
+ 0.25 , - 0.10 |
0.45 |
0.70 |
|
9.0 - 10.0 |
+ 0.30 , - 0.10 |
0.50 |
1.00
|
|
